bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about K-Z


  • Availability of Replacement Gooseneck Inner Tube Coupler with 4-1/2 Diameter
  • The only replacement gooseneck coupler inner tube that we carry which has the 4-1/2" outside tube measurement is the Bulldog Gooseneck Coupler # BD0287690300. This is a round coupler that has a weight rating of 20,000 lbs and fits over a 2-5/16" hitch ball. If instead you have a square coupler the only option we have to offer is an entire replacement like with th Ram # GCSQ-25008 which is rated for 25,000 lbs and a 2-5/16" hitch ball. This comes with both the inner and outer tubes which...
    view full answer...

  • Do the Hubs/Drums Need Changed When Replacing the Braking Assemblies
  • To summarize, you have 12" x 2" Hayes Braking Assemblies with round magnets. If the magnets have failed then you would need to replace the entire braking assemblies as they no longer offer these magnets as replacement parts. Therefore, I recommend the Hayes/AL-KO Electric Trailer Brake Kit part # 185100-150 which use a five bolt brake mounting flange. If the hub/drums that you have now are not out of round then you can reuse them with the Hayes/AL-KO Electric Trailer Brake Kit. You would...
    view full answer...

  • Replacement 1157 Bulb for Wesbar Submersible Low Profile Trailer Tail Lights
  • If you have the Wesbar Submersible Low Profile Trailer Tail Lights # 403026 and # 403076 on your trailer, which the replacement lens # 102641 fits, then the correct replacement bulb is the 1157 part # A1157B on our site. If you would like to replace them with red LED bulbs then we also have part # P231157R360 that you can use.
    view full answer...

  • Replacement 30 amp to 30 amp Cord for a 2004 Aruba Starcraft 5th Wheel Trailer
  • Yes, you should be able to just use a cord like the Mighty Cord # A10-3025ED90 which has a 30 amp male to a 30 amp twist lock female connector. Attached is a review video for you to check out.
    view full answer...

  • Replacement Spring Bar Retainer Clips for Curt Trunnion Bar Weight Distribution System
  • I do have an option for you but the Curt Bolt Kit for Trunnion Style Weight Distribution Hitch part # C17350 does not come with the spring bar retainer clips that you are referring to. Unfortunately, these retainers clips are not sold separately as they are built into the head so if the head you have now does not have these or they were damaged then you would need to replace the entire head as well with the Curt Replacement Weight Distribution Head for Trunnion Style Bars part # C17307.
    view full answer...

  • How to Choose Replacement Bearings and Seal for Utility Trailer
  • I wish I could tell you based off of the picture you sent in what bearings work with your spindle but if you don't have numbers on your bearings then the next best thing is to take a digital caliper and measure where each of the bearings and the grease seal sit on the spindle to the 3rd decimal (for example 1.234). Replacement bearings and seals need to fit exact which is why it is important to use either the part numbers or the caliper. If you know the weight rating of your trailer axle...
    view full answer...

  • Upgrading Demco Hijacker Autoslide 5th Wheel Hitch for Ford OEM Puck Compatibility
  • Since you have the Demco Hijacker Autoslide and a Ford truck with OEM pucks you simply need the Replacement Side Plates for Demco Hijacker Autoslide 5th Wheel Trailer Hitch - Ford Super Duty # DM6033. This will make your hitch fit your factory pucks perfectly whether the hitch itself is rated for 18K or 25K.
    view full answer...

  • Replacement OEM 7-Way Connector for a 2018 Toyota Tundra
  • We have exactly what you need with the Hopkins # HM40975 Mounting Bracket! This is the replacement connector for your 2018 Toyota Tundra and provides you with both the 4-Way and 7-Way like what originally came on your pickup. Attached is a review video for you to check out.
    view full answer...

  • Best Solution for Carrying Heavier E-Bikes at Rear of Vehicle
  • The bikes would technically fit on the bike carriers of the Malone MicroSport Trailer with Pilot TC ST Aluminum Bike Racks # MPG461KB but the bike carriers would not have the needed capacity for your e-bikes. I also checked all of our roof bike racks and none have a higher capacity than 50 lbs. Which normally isn't an issue as most of the time people aren't wanting to lift a heavier E-bike to the roof of a vehicle. Your most ideal solution will be a hitch mounted bike rack designed for...
    view full answer...

  • Replacement Knobs for SportRack Crest Platform Bike Rack
  • We sure do! You'll need part # 050045. All 6 knobs on the rack are the same part number, so this part will work for the sliding mechanism on the wheel hoops as well as those on the bike retaining hooks.
    view full answer...

  • Replacement Amber Lens for John Deere 2032 Tractor Based on Measuring
  • We don't have a specific fit guide for your John Deere 2032 tractor. It appears to be a rectangular lens so I've linked the page to all the options we carry. There will be the dimensions for each lens on the page, so I recommend measuring your lens to help with the best replacement.
    view full answer...

  • Correct Replacement Screen, Frame, and Lid for Ventline Ventadome VD0434
  • The Ventline Ventadome VD0434 uses the screen part # BVD0434-31, the frame part # BVA0444-32, and lid part # BVD0449-A01 or part # BVD0449-A03.
    view full answer...

  • Replacement Threaded Dust Cap Needed with 3.43 Threaded Diameter
  • The only time that I've seen a plastic cap is for an oil cap, so for your gooseneck trailer the Dexter Axle Replacement Oil Cap Kit for 9,000-lb and 10,000-lb Axles # RG04-300 should be the right fit as it has a threaded diameter of 3.47". Since the threaded diameters are similar and it's easy to get slightly different measurements in the hundredths place I'm pretty sure that this is what you're looking for. If you have a standard grease cap that has those threaded measurements then we...
    view full answer...

  • Replacement L-pins for 12k Equal-i-zer Weight Distribution System
  • The L-pins you're looking for are part # EQ95-01-9430. These fit the Equal-i-zer systems from 6,000 to 14,000 pound so they're for your 12,000 pound system which is our part # EQ37120ET.
    view full answer...

  • Replacement Motor and Control Unit for Kwikee Series 39 Steps
  • The replacement components for your Kwikee Series 39 Steps on your 1999 Damon Ultrasport include the following: Control Unit - # LC379606 Motor - # LC379147 Gearbox - # LC379161 Since your gearbox looks to be in good working order I'd try applying power to the motor directly to see if everything operates as it should. If it does then I'd agree that just the control unit needs to be replaced. If it doesn't then you likely need to replace the motor as well. If your gearbox needs to be...
    view full answer...

  • How to Determine Bearings for 2008 Forest River Rockwell Ultra Lite
  • I am not able to cross reference that part number for your trailer. There are two ways to get your correct axle bearings; one is to pull the hub and remove the rear seal carefully so you can get the correct seal number and bearings. The seal will have a part number on it as will the face of both the inside and outside bearing. The other option is to use a digital caliper like # PTW80157 to measure the spindle in those 3 locations. I've attached a photo to assist.
    view full answer...

  • Replacement Control Panel for Atwood Water Heater
  • I believe the Replacement Control Panel for Atwood Water Heaters # AT91367 is what you are describing. You may also need the Replacement 4-Wire Control Harness for Atwood Water Heaters # AT93312.
    view full answer...

  • Replacement Rear Tire Tray for Thule T2 Bike Rack with Rectangular Tubes
  • The Replacement Rear Wheel Holder Assembly for Thule T2 Pro Platform Bike Racks - Qty 1 # 7521682001 or the Fat Tire Adapter Kit for Thule T2 Platform-Style Bike Rack # 7521568001 for the T2 Classic are your options. If you don't have a fat bike and have the T2 Classic bike rack, it will still work just fine which is why we don't have the one that comes with the rack. The T2 Pro has a rounded top where the Classic is rectangular.
    view full answer...

  • Replacement OEM BOLT Lock for Extang EnCore Tonneau Cover on 2009 Chevy Silverado
  • We do have the correct replacement OEM BOLT Lock that will work with the Extang EnCore tonneau cover on your 2009 Chevy Silverado, so long as your EnCore tonneau cover was made after 2013. If so, the replacement lock is the following: - Replacement OEM BOLT Lock for Extang EnCore Hard Tonneau Covers # EX28620162-28
    view full answer...

  • Replacement Motor and Fan Blade for Ventline V2100 Roof Vent
  • We do have the correct replacement fan motor and blade for your Ventline V2100 roof vent, which are the following: - Replacement 12V DC Motor for Ventline, Ventadome, and Vanair Fans # BVD0218-00 - Replacement Fan Blade for Ventline Ventadome Trailer Roof Vents # BVD0215-00 I have added links to video reviews of both parts for you to check out as well.
    view full answer...



^

Recently Viewed Products

About Us
photos and videos
1,056,204
Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570
Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511
Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+
Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
78
Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357
Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.